Working Hours
Mon - Fri: 08:00am - 06:00pm
Quick Contact
416 317 3408
Email Us
info@removemywalls.ca
Mon - Fri: 08:00am - 06:00pm
416 317 3408
info@removemywalls.ca
Looking to remove a load-bearing wall in your Toronto home? Remove My Walls is the GTA's specialist in load bearing wall removal — and unlike most renovators, we have a structural engineer in-house. That means engineered drawings, permit packages, and beam specifications all handled by one team. We've safely removed hundreds of load-bearing walls across Toronto and the GTA over 15+ years.
A load bearing wall is a structural element that carries the weight of your home — transferring loads from floors, ceilings, and the roof down to the foundation. Unlike a partition wall, removing a load bearing wall requires careful engineering: the load it carries must be redirected through a properly sized replacement beam, supported by new posts and footings. This is not a DIY project, and it's not a job for a general renovation contractor. Every load bearing wall removal in Toronto requires a licensed wall removal structural engineer to assess the loads, design the beam, and produce stamped drawings for your building permit. At Remove My Walls, that engineer is on our team — not a third party you wait weeks for.
Most load-bearing wall removal contractors in Toronto will bring in a third-party engineer after the fact — adding delays, extra costs, and gaps in accountability. Remove My Walls does it differently: our in-house structural engineer is involved from day one, which means faster permits, tighter coordination, and a single team responsible for the entire project.
Our wall removal structural engineer visits your home, confirms whether the wall is load bearing, and determines the beam span and size required.
We produce stamped structural drawings required for your building permit application.
We submit the permit to your city or municipality and manage all back-and-forth until it's approved.
Our crew installs temporary supports, removes the wall, and sets the new LVL or steel beam with full structural backing.
Yes — with the right engineering, permits, and structural support system in place. A load bearing wall can be safely and completely removed by replacing it with a properly engineered beam. Remove My Walls specializes in exactly this and handles the full process from engineering to final inspection.
Hire a contractor with in-house structural engineering expertise — not a general handyman or a renovation contractor who subs out engineering as an afterthought. Load bearing wall removal contractors who skip proper permits or engineering can void your home insurance, fail future home inspections, and cause serious structural issues. Remove My Walls combines licensed structural engineering and experienced installation under one team.
The cost to remove a load bearing wall in Ontario typically ranges from $4,000 to $12,000+, depending on the beam span, beam type (LVL vs. steel), permit fees, and the complexity of the structural support required. Contact Remove My Walls for a clear, all-in quote for your specific project — we don’t charge for assessments.
Yes. Removing a load bearing wall in Ontario without a building permit is illegal. It can result in municipal fines, a failed inspection when you sell, and voided home insurance. Every load bearing wall removal we complete is fully permitted and inspected — we manage the entire permit process for you.
Yes — Ontario Building Code requires stamped structural drawings from a licensed engineer before a permit will be issued for load bearing wall removal. At Remove My Walls, our in-house structural engineer handles this as part of every project at no additional coordination cost to you.
In most homes, the entire load bearing wall can be removed and replaced with a single continuous beam spanning the full opening. The maximum safe span depends on the loads above, the beam material, and your foundation. Our structural engineer will specify the exact solution during the initial assessment.
Yes. With proper temporary shoring during construction, the removal process is contained and efficient. Our crew protects your floors, controls dust, and typically completes the structural work in one to two days. Most homeowners are surprised by how clean and fast the process is.
Wherever you are in the GTA, we bring the same standard of in-house engineering, permit management, and quality workmanship. Contact us to confirm service in your area. Our structural engineers and installation crews serve:
Get a free consultation on your load bearing wall removal project in Toronto or anywhere across the GTA. We’ll assess your wall, explain the process, and give you a clear, no-obligation quote.